Ezviz W3 User Manual

3
Wiring
1. Connect the WAN port to the Internet via network cable.
IPC
ACCESS
ADSL Modem/Optical Modem/Optical
Network Unit/Cable Modem
Network Port
OR
2. Connect your router to power outlet via power adaptor and wait for 90 seconds.
Power Outlet
Power Adaptor
IPC
ACCESS
Configuring
You can configure the parameters through the computer or the mobile phone. We take the computer configuration as
an example.
3. Connet the LAN port and the computer via network cable. The computer will get the IP address of the
router automatically.
IPC
ACCESS
4. Open the Internet broswer (Internet Explorer 8.0 and above is recommeded) and input 192.168.7.1 or
wifi.ezvizlife.com. Press Enter to go to the configuring page.
5. Set the parameters such as router password, Wi-Fi name and password, etc.
You can also connect your mobile phone to Wi-Fi from the router, open the broswer in the mobile phone, and follow Step 4
and Step 5.

Ezviz W3 Specifications

General

Brand	Ezviz
Model	W3
Category	Network Router
Language	English