Need help?Do you have a question about the F.W. Bell 5270 and is the answer not in the manual?
General| Brand | F.W. Bell |
|---|---|
| Model | 5270 |
| Category | Measuring Instruments |
| Language | English |
Essential safety precautions for operating the instrument and probes.
Guidelines for safe handling, storage, and disposal of lithium-ion batteries.
Steps for preparing the meter and connecting the probe before operation.
How the meter indicates low battery and its implications for operation.
How to select between AC and DC magnetic field measurement modes.
Setting the display units for flux density (Gauss, Tesla, A/m).
Choosing between auto or fixed measurement ranges.
Activating Min, Max, or Peak hold functions for readings.
Importance and process of zeroing the probe and meter for accurate DC measurements.
Performing an automatic zero adjustment for DC offset compensation.
Performing a manual zero adjustment to set a specific offset value.
Subtracting a reference flux density value from all readings.
Setting the relative offset automatically from the current reading.
Setting a manual relative offset value.
Setting audible alerts for measurements within or outside a defined range.
Enabling/disabling and using the analog voltage output signal.
Identifying common factors that can cause measurement errors.
Requirements for connecting the meter to a computer via USB.
Command to initiate an automatic zero operation.
Commands to control the relative measurement function.
Command to acquire a new flux density reading.
A table listing error codes, their buffer text, description, and possible causes.
Steps to launch the PC5200 software and connect the Gaussmeter.
To Next Page
