3
1
2
3
4
5
6
8
9
7
1 2
3 4
DESCRIPTION
SYMBOLS
LED-SIGNAL
DETECTION LEDs
no detection
ERROR LED POWER LED
detection
no error
error
no power
power
Caution!
Laser radiation
LED flashes quickly
LED flashes
LED is off
1. laser
sweep emission
2. laser sweep reception
3. LED-signal (4)
4. screw for position lock (2)
5. connector
6. protection cover
7. visible laser beam (3)
8. notch for tilt angle adjustment (2)
9. adjustable bracket
1. Detection LED: relay 1 - opening field
2. Detection LED: relay 2 - safety field
3. Error LED
4. Power LED
Remote control
sequence
Possible remote control
adjustments
Factory values
LED flashes slowly
All 4 LEDs can be switched off and on again by remote control.
This can be useful in cases where the sensor should not draw any attention.
Important Tip
Quick
installation
To Next Page
Loading...