Do you have a question about the Faber Vaska and is the answer not in the manual?
Brand | Faber |
---|---|
Model | Vaska |
Category | Indoor Fireplace |
Language | English |
Initial fire use: ventilation, paint hardening, and keeping people/pets away.
Appliance installation rules: environmental, clearance, and material distances.
Flue calculation, restrictor use, and different outlet types (wall, roof, chimney).
Guidelines for gas connection, including shut-off valve and accessibility for service.
Requirement for a 230VAC/50Hz wall socket near the fireplace for the control unit.
Instructions for connecting the controller to external systems via a Faber Interface Unit.
Steps for preparing the fireplace: unpacking, removing parts, and preparing gas connection.
Procedure for opening the appliance door, including securing the locking screw.
Guidance on placing the fireplace according to installation requirements, without height adjustment.
Instructions for installing flue pipes, including material distance and pipe slope.
Using a gas leak finder to check all connections and pipes for any leakage.
Verifying inlet and burner pressure against the rating plate and technical specifications.
Advice on cleaning the glass, emphasizing avoiding fingerprints and using specific polish.
List of documents and items to be handed over to the customer after installation.
Instructions for cleaning the appliance, specifically the front glass using Faber glass polish.
Definition and explanation of Start Length (STL) used in flue restrictor tables.
Definition and measurement of Total Vertical Height (TVH) from appliance to outlet.
Guidance on using the restrictor table to determine correct flue restrictor size based on TVH and THL.
Table of values for various flue lengths and bends used in STL calculation.
Section for recording measured and rounded vertical height for flue calculation.
Section for calculating total horizontal length based on pipe and bend types.
Detailed dimensional drawings of the Vaska appliance, including overall size and connection points.