fabritec BD Series User Manual

4A
4C
Regular drawer assembly.
Assemblage tiroir régulier.
4B
Inner drawer assembly.
Assemblage tiroir intérieur.
Pots drawer assembly.
Assemblage tiroir à casserole.
5
Drawer front adjustements.
Ajustements de la façade de tiroir.
2
Installing drawer slides inside the cabinet.
Installation des coulisses de tiroir dans le caisson.
3
Install drawer on slides installed in the cabinet.
Installer le tiroir sur les coulisses posées dans le caisson.
6
Install decorative plates.
Poser les plaquettes décoratives.
!
To remove drawer front.
Pour retirer la façade de tiroir.
Regular/Régulier
For pots/Pour casseroles
69 mm
96 mm
3
25/32
“
2
3/4
“
32 mm
10 mm
3/8 “
1
1/4
“
1
1/2
“
39 mm
1
1/2
“
39 mm
10 mm
3/8 “
10 mm
3/8 “
Bottom/Bas
88 mm
3
1/2
“
32 mm
10 mm
3/8 “
10 mm
3/8 “
12 mm
7/16 “
10 mm
3/8 “
1
1/4
“
1
1/2
“
39 mm
1
1/2
“
39 mm
10 mm
3/8 “
12 mm
7/16 “
10 mm
3/8 “
10 mm
3/8 “
Top/Haut
Templates - When using a door as drawer front (BPO option)
Gabarits - Quand une porte est utilisée comme façade (option BPO)
!
Cut-out / Découpez
!
Cut-out / Découpez
Actual size / Taille réelle
- Wrap masking tape around the drill bit at the desired depth to create a stopper.
- Enrouler du ruban gommé autour de la mèche à la distance désirée pour créer un arrêt.
Trick / Truc
12 mm,
7
/16”
1
Install Drawer Front Clips.
Poser les attaches pour façades de tiroir.
1
Install Drawer Front and Rod Clips.
Poser les attaches pour façades et xations de tige.
Refer to the instructions on the following pages.
Suivre les instructions sur les pages qui suivent.
Do not overtighten the screws.
Ne pas trop serrer.
Do not overtighten the screws.
Ne pas trop serrer.
2
Install drawer front panel.
Poser la façade au tiroir.
Left side rst.
Côté gauche en premier.
Left side rst.
Côté gauche en premier.
2
Install tall drawer front to drawer.
Poser la grande façade au tiroir.
3
Install the rods.
Poser les tiges.
4
Slide rod end covers in place.
Glisser les caches embout de tige en place.
Left side rst.
Côté gauche en premier.
A
B
A
B
Drawer will clip in once
fully pushed in place.
Le tiroir s’ancrera
une fois poussé au fond.
Or/Ou/O
BD_ B2D_ B_D3
B3D_ B4D_ BPO_
BD1D_
BM1D_
Top
Haut
Top
Haut
Bottom
Bas
Bottom
Bas
2x
4x
A
A
4x
8x
A
2x
4x
A
6x
12x
B
6x
12x
A
A
A
A
6x
12x
4x
A
8x
16x
A
4
4
10
22
4
10
16
22
4
13
22
10
22 22 22
16
13
7
A
A
A
A
A
A
A
B
B
B
B
B
A
A
B
Regular/Régulier
88 mm
3
1/2
“
32 mm
10 mm
3/8 “
10 mm
3/8 “
12 mm
7/16 “
10 mm
3/8 “
1
1/4
“
1
1/2
“
39 mm
1
1/2
“
39 mm
10 mm
3/8 “
Top, Haut
!
Cut-out / Découpez
For pots/Pour casseroles
69 mm
96 mm
3
25/32
“
2
3/4
“
32 mm
10 mm
3/8 “
1
1/4
“
1
1/2
“
39 mm
1
1/2
“
39 mm
10 mm
3/8 “
10 mm
3/8 “
Bottom, Bas
10 mm
3/8 “
12 mm
7/16 “
10 mm
3/8 “
!
Cut-out / Découpez

fabritec BD Series Specifications

General

Brand	fabritec
Model	BD Series
Category	Indoor Furnishing
Language	English

Summary

Base Cabinet Drawer Assembly Steps

Install Drawer Slides Inside Cabinet

Step 1: Guides the installation of drawer slides within the cabinet structure.

Install Drawer on Cabinet Slides

Step 2: Guides the placement of the assembled drawer onto the installed cabinet slides.

Install Drawer Front Panel

Step 3: Instructions for attaching the drawer front panel to the drawer assembly.

Assemble Drawer Types

Steps 4A, 4B, 4C detail the assembly of regular, inner, and pots drawers.

Adjust Drawer Front

Step 5: Provides guidance on making adjustments to the drawer front for proper alignment.

Install Decorative Plates

Step 6: Instructions for attaching decorative plates to the drawer.

Drawer Component Identification and Preparation

Drawer Configurations and Parts

Lists components and quantities for various base cabinet drawer types (BD, B3D, B2D, etc.).

Remove Drawer Slides

Instruction 1: Details the process for removing drawer slides from their packaging or previous state.

Prepare Drawer Front

Instruction 3: Guidance on using a door as a drawer front, including necessary preparation steps.