Fabyka FA Series - Table of Contents; Tools Needed

Table of Contents
INSTALLATION
Tools needed....................................................3
Parts supplied...................................................4
Venting requirements.......................................5
Mount heights & clearance...........................5-6
Calculating vent system length.......................6
Venting methods..............................................7
Electrical requirements....................................8
Preparation......................................................9
Installation................................................10-11
Installation overview.....................................11
USE AND CARE
Range hood operations.............................12-13
Troubleshooting...........................................14
Use and care information...............................15
Specications..............................................15
MAINTENANCE
Cleaning...............................................16
Replacing the lter & light bulb.....................16
WARRANTY
Coverage & exceptions.................................17
Service Note..................................................18
Tools needed:
Page 3
Level
Flat-blade and
Philips screw-
drivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil
Adjustable Wrench