[Channel] Choose the corresponding channel number.Choose the all option
To set the entire channels.
[Redundancy] Choose the redundancy function to double backup the file.
[Length] Set the time length of each video file between 1min to 120min.
60 minutes is deault value.
[Mode] Set video state:schedule,manual or stop.
Configration:Record according to the set video type(common,detection)and time section.
Manual:Corresponding channel starts recording 24 hours non-stop.
Stop:whatever state the channel is in,the corresponding channel recording stops when
stop button is selected.
[Period] Set the time section of common recording,The recording will start only among the
set range
[Record type] Set recording type:regular,detection,alarm
Regular:Record according to the set time section.The video file type is “R”
Detect:Whthin the set time section,trigger the motion detect,video blind,video loss or
abnormal analysis.When above alarm is set as
Opening recording,the recording detection state is on.The videl file type is M.
5 Playback
There are two ways for you to play the video files in the HDD.
1,In the right shorcut menu
2.<Main Menu>
-<Record>
-<Playback>
Note:The HDD which saves the video files must be set as read-write or read-only state.
Pic.:Record Play back
Double -click the file named to playback the video.
To Next Page
Loading...
