To Next PageTo Next Page
Need help?Do you have a question about the Facom X.730B and is the answer not in the manual?
General| Brand | Facom |
|---|---|
| Model | X.730B |
| Category | Power Tool |
| Language | English |
Describes the layout and components of the timing light display, including segments and LEDs.
Details the timing light's capabilities for 2/4 stroke engines and various measurement types.
Explains how to diagnose engine faults without disassembly, covering key systems.
Provides essential safety and maintenance advice for prolonging the unit's lifetime.
Guides on connecting and mounting the timing light for optimal operation.
Details the procedure for checking the dwell angle and potential causes for variations.
Instructions for measuring engine RPM using the inductive clamp or stroboscope.
Procedure to check breather pipes for proper function and potential occlusions.
Guidance on checking and adjusting the mechanical timing mark alignment.
Steps to measure engine advance and check timing marks alignment.
Procedure for measuring centrifugal advance at specified engine speeds.
How to check the vacuum advance function by connecting a vacuum tube.
Procedure for checking acceleration retard in engines equipped with this device.
Instructions for measuring various voltages related to engine systems.
Instructions on how to reset the timing light in case of display faults.
Procedure for setting the dwell angle measurement in milliseconds, degrees, or percentage.
Configuring the unit for the number of cylinders and sparks per revolution.
Steps to measure engine RPM using the stroboscope without contact.
