The digital readings for airline and ambient temperatures, oxygen
content and airline pressure are now set and these results should
be recorded.
Remove all the tubes and record results on the Factair result pad.
Note: For instructions on reading detector tubes and their safe
disposal, refer to the laminated sheet stored within the tester’s carry
case (also added as an appendix within this manual).
(xiv) To restart the tester for a subsequent test, momentarily depress the
ON/OFF button. To switch off the tester depress and hold the
ON/OFF button for approximately 2.5 seconds.
Note: The tester will automatically switch off, if not used, after a
period of 1 hour.
- 11 -
APPENDIX 1
The following information is only for EU-
member states:
The use of the symbol indicates that this product
may not be treated as household waste. By
ensuring this product is disposed of correctly you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about the recycling of this product
please contact your local city office, your
household waste disposal service or the
manufacturer/shop from whom you purchased the
product.
To Next Page
Loading...
Need help?
General