Need help?Do you have a question about the Factem FL20 Series and is the answer not in the manual?
Addresses magnetic field risks, ingestion hazards, and ANR sound perception.
Covers protection from moisture, temperature, and proper repair procedures.
Outlines the headset range versions and details the Active Noise Reduction (ANR) functionality.
Instructions on how to properly wear and adjust the headset for comfort and stability.
Guidance on positioning the microphone correctly in front of the mouth for clear communication.
Explains how to use the flip-away eardome to free up one ear.
Details the process for adjusting microphone sensitivity using a tool.
How to activate and use the Active Noise Reduction (ANR) feature.
Warnings against using liquids or cleaning agents; use a soft cloth only.
Step-by-step guide for removing and installing new earpads.
Instructions on how to replace the headband pads for hygiene and comfort.
Technical details for the headphone component, including impedance and frequency response.
Technical details for the microphone, including sensitivity and frequency response.
Specifies the ANR effectiveness in decibels at a given frequency.
Lists general attributes like weight, cord length, and ANR power.
Pin assignments and signal descriptions for different FL20 cable connectors.
States the product warranty period and where to find conditions.
Lists compliance directives for RoHS and Reach.
Mentions the ETSO/TSO C139a certification.
General| Microphone | Yes |
|---|---|
| Driver Size | 40mm |
| Frequency Response | 20Hz - 20kHz |
| Microphone Type | Omnidirectional |
| Microphone Frequency Response | 100Hz - 10kHz |
| Connection | Wired |
| Type | Over-ear |
| Connector | 3.5mm |
| Impedance | 32 Ohms |
To Next Page
