The FactorFOGGER HazeCase 1500 is a professional 1500W hazing machine designed for events, productions, film, and TV. It produces a very fine mist that enhances lighting effects with a constant flow and adjustable intensity. The device comes in a honeycomb flight case for protection and portability.
Technical Specifications:
- Heater: 1200W
- Total Power Consumption: 1400W
- Fuse: 250V, 8A
- Smoke Production: Continuous
- Maximum Flow: 15ml/min (0.1-15ml/min liquid consumption)
- Maximum Liquid Consumption: 900ml/hr
- Initial Heating Time: 2 minutes
- Fluid Tank Capacity: 5 liters
- Power Supply: AC220-240V, 50/60Hz
- Dimensions: 490 x 410 x 235 mm
- Packaging Dimensions: 520 x 440 x 260 cm
- Net Weight: 16 kg
- Weight with Packaging: 17.3 kg
- Fluid Type: Water-based Hazer Fluid only (e.g., code 832-1062 Triton-Blue)
Usage Features:
The HazeCase 1500 offers a range of control options for precise operation:
- LCD Display: An easy-to-use LCD display allows for parameter control.
- DMX Control: It features 2-channel DMX control, allowing adjustment of output level and fan speed.
- Channel 1 (Control speed of fan): DMX value 0-255 (from small to large)
- Channel 2 (Control quantity of fluid): DMX value 0-255 (from small to large)
- Manual Control Panel: The device includes a control panel with the following buttons:
- MENU: Accesses main functions.
- UP: Increases parameter values.
- DOWN: Decreases parameter values.
- TIMER: Adjusts haze/smoke time.
- VOLUME: Adjusts haze/smoke output quantity.
- STOP: Stops operation/exits menu.
- Timer Mode Setting:
- Interval Set (5-200 sec.): Configures the interval between haze bursts.
- Duration Set (1-200 sec.): Configures the duration of each haze burst.
- Timer Out (1-100%): Sets the haze output level during timer operation.
- After setting, press TIMER to start.
- Normal Haze Output Setting:
- Volume Out (1-100%): Sets the continuous haze output level.
- After setting, press VOLUME to start.
- Fan Speed (1-100%): Adjusts the fan speed.
- DMX Address Setting (001-512): Configures the DMX address.
- Fluid Running Out Protection: The device includes a double sensor system to protect against lack of fluids, which can be turned ON/OFF.
- Constant Smoke Output: Ensures a consistent haze effect.
- Variable Smoke Outlet Angle: The angle of haze output can be manually adjusted.
Connectivity:
- Power Connection: Uses a Powercon Schuko cable (1.5 meters included). The wiring configuration is Brown (Live), Blue (Neutral), and Yellow/Green (Earth).
- DMX 512 Connection: Supports 3 or 5-pin XLR connectors for DMX input and output.
- XLR Pinout:
- 1: Ground
- 2: Signal (-)
- 3: Signal (+)
- 4: Not connect
- 5: Not connect
- It is crucial that DMX cables do not come into contact with each other to ensure proper functionality. The starting DMX address depends on the controller used.
Safety Instructions:
- Intended for indoor use by professional technicians only.
- Always turn off, unplug, and allow the fixture to cool before servicing.
- Ensure the fixture is properly grounded.
- Do not expose to rain or moisture.
- Install in a well-ventilated area, ensuring no ventilation slots are blocked.
- Never crimp or damage the power cord.
- Do not remove the top cover; there are no user-serviceable parts inside.
- Disconnect main power when not in use for long periods.
- Never connect to a dimmer pack.
- Never operate with the cover removed.
Maintenance & Service:
- Cleaning: Clean with a soft cloth using normal glass cleaning fluid. Always dry parts carefully.
- Troubleshooting:
- Device not working: Check power connection and main fuse.
- Not responding to DMX controller:
- Check DMX connectors and cables for proper link.
- Verify DMX address settings and polarity.
- If intermittent DMX signal problems occur, check pins on connectors or PCB.
- Try a different DMX controller.
- Ensure DMX cables are not running near high-voltage cables that could cause interference.
- Check the fluid level in the tank.
Warranty:
- Warranty service is valid only under normal use.
- Excludes human-made damage, such as inadequate power access, use of inappropriate accessories, non-manual use, transport damage, unapproved repairs/modifications, misuse, negligence, or incorrect installation.
- Does not cover accessories, vulnerable parts, assistive devices, transportation, or on-site maintenance personnel fees.
- Contact the supplier for problem resolution or questions.
To optimize the recovery and recycling of materials from old appliances and reduce environmental impact, ensure this product is recycled at the end of its life.
Need help?
General
To Next Page