21
Figure 6-17 Controller cruise control setting interface
Figure 6-18 6km/h walk assist setting interface
6.17 Controller cruise control setting
17P is the controller cruise control setting. The display can choose the following: 00→non
enable, 01→enable.
Press i button to enter the parameter changing state. Press the plus / minus button to select
the parameter and press i button to save the parameter setting and return to the
personalized parameter setting interface.
6.18 6km/h walk assist mode setting
18P is the 6km/h walk assist setting. The display can choose the following: 00→turn off walk
assist function, 01→turn on walk assist function.
Press i button to enter the parameter changing state. Press the plus/minus button to select
the parameter and press i button to save the parameter setting and return to the
personalized parameter setting interface.
To Next Page
Loading...
