The control panel is shown in gure 10. For reference it is also shown below:
1234567
The control panel is located inside the appliance on the top wall of the refrigerator
compartment. It allows you to change the temperature in both chambers. Touch few
times sensor to change the temperature, on the display set value will ash.
If You want to turn o the appliance, touch sensor. You can also turn on the appli-
ance using it.
• The temperature inside the appliance is inuenced by many factors. How you
set the temperature control dial depends on the ambient temperature, sun ex-
posure, how often you open the door and the amount of food stored. The middle
setting of the dial is most optimal in most cases.
• Do not put food into the fridge freezer before it has reached its operating temper-
ature, which takes minimum 4 hours.
• Do not change the temperature settings due to the change in the season of the
year. The ambient temperature increase will be detected by the sensor and the
compressor will be switched on automatically for a longer period of time in order
to maintain the temperature set inside the chambers.
• The slight changes in temperature are perfectly normal and may occur, for in-
stance during the storage of great quantities of fresh products in the fridge, or
when the door is open for a longer period of time. This will not aect the condition
of the stored foodstu, and the temperature will quickly return to its set value.
To Next Page
Loading...
