11
In order to ensure adequate ventilation, the back panel of the cabinet unit must be
removed. Installing the oven so that it rests on two strips of wood is preferable. If
the oven rests on a continuous, at surface, there must be an opening of at least
1
49
/64” x 22
23
/64” (45×568mm).
The panels of the adjacent cabinets must be made of heat-resistant materials. In
particular, cabinets with a veneer exterior must be assembled with glues that can
withstand temperatures of up to 215°F.
In compliance with current safety standards, the electrical parts of the oven must
be completely out of reach once it has been installed.
All parts, which ensure the safe operation of the appliance, must only be removed
with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by
inserting the 4 wooden screws into the 4 holes located on the perimeter of the
frame.
To Next Page
Loading...
