Chapter V - TROUBLESHOOTING
If you discover a problem when using the Driron, you will probably be able to solve it after checking
the following table of the most common technical problems.
– 76 –
• There is no power in the mains or the
appliance is not plugged in.
• After selecting the programme, you have
not pressed the start button
.
• The door is not closed correctly.
• The removable water collection tank is
not in position.
• The removable tank is too full.
PROBLEM
The appliance does
not come on.
SOLUTIONPOSSIBLE CAUSE
• Check that there is power in
the mains and that the
appliance is plugged in.
• Press the start button
.
• Close the door correctly.
• Put the tank in position.
• Empty the tank.
• The clothes have been placed in the
appliance when they were too damp.
Perhaps they were not spun dry.
• The air intake (protected with the grille)
on the rear of the appliance is obstructed.
• The filters inside the wardrobe are
obstructed.
• The ambient temperature of the room
where the appliance is located is very
high. The high temperatures in the area
where the appliance is located hinder the
drying process and make it last too long.
The duration of the
programme is too
long.
• Do not put clothes inside the
wardrobe if they are too damp.
We recommend you spin the
clothes in the washing machine
at a minimum of 700 rpm.
• Clear the air intake area.
Remove obstacles from the air
intake.
• Clean with a dry cloth.
• Ventilate the room. Open the
window or door. Lower the
ambient temperature.
1
TABLE OF MOST COMMON TECHNICAL PROBLEMS
To Next Page