Fagor FG403 - Page 45

OPERACIÓN
the preset time. Press the “Temp”
button 15, to show the preset
temperature.
Waiting
mode
 Once the oil reaches the preset
temperature then the deep fryer will
warn “beep”. The display 11, will now
show the current temperature. Should
the deep fryer be left without any
selection for 1min then it will
automatically switch to standby mode.
Frying Mode
 After entering waiting mode, press the
ON/OFF button12, the deep fryer will
stop “beeping”. The display 11 will show
the preset time and count down.
 During the frying process, press the
“Time” button 14 and the display 11 will
show the preset time. Press the “Temp”
button 15 and the display 11 will show
the preset temperature. Left the deep
fryer without any selection for 5s then it
will automatically switch to the
countdown timer.
 Once the deep fryer has reached the
end of its preset time, it will emit ten
“beeping” (beep 2s, stop 1s). It will
stop heating up. The display 11 will
show the last set state and switch to
setting mode.
 Press the ON/OFF button 12 when the
fryer is working and the deep fryer will
stop the heating process. The display
11 will show the default code and
switch to setting mode.