• Why does the dishwasher not start?
This could be because:
- There is no electricity supply.
- It is not plugged in properly
- The fuses have tripped
- The dishwasher is not connected to the electricity supply
- You have not pressed the On/Off button (the indicator light for this button must be
continuously lit)
- The dishwasher door is not closed properly.
- The start button has not been pressed.
• The dishwasher starts but no water enters
This could be because:
- There is no water in the network.
- The stopcock is not open
- The water inlet solenoid valve filter is obstructed.
• It does not drain, water remains inside.
This could be because:
- The drainage is obstructed or badly installed.
- The drain pipe is obstructed or folded
- The filters are blocked
- The selected program has not finished, wait for it to finish.
• There are detergent remains in the dispenser or on the door
This could be because:
- A dish is preventing the dispenser from opening
- The detergent is past its expiry date or is not appropriate
- The water spray arms are hitting a dish
- The water spray arm holes are covered.
- The detergent compartment was damp when the detergent was put it. The compartment
must be dry.
• Unusual foam is formed:
- You have put in washing up liquid instead of dishwasher detergent.
• The dishwasher makes strange noises
This could be because:
- You have not positioned the dishes correctly.
- The water spray arms are hitting a dish
To Next Page
Loading...
