To Next PageTo Next Page
Need help?Do you have a question about the Fagor MicroMATVbook and is the answer not in the manual?
Connect the unit ground point, antennae, and power supply for initial setup.
Explains the function of the OK, arrow, and value adjustment keys for navigation and control.
Describes the meaning of flashing dots, illuminated dots, and middle dots on the display.
Covers entering standby mode, PIN code entry, and accessing the main menu.
Details how to navigate the Main Menu using arrow keys.
Selects the number of filters connected to each UHF input (5-0, 4-1, 3-2).
Selects channels for amplification in each UHF filter, preventing adjacent channel conflicts.
Configures the VHF input (OFF, BI, BIII, BI-BIII, DAB) and analogue channel presence.
Performs automatic level adjustment for UHF/VHF and manual adjustment of output levels.
Adjusts the FM output level using the arrow keys.
Memorizes the current unit configuration, indicated by flashing LEDs.
Accesses advanced settings after output levels are adjusted.
Manually adjusts gain for each active UHF filter and VHF input.
Applies or eliminates 0 or 10 dB attenuation for each UHF input.
Resets all unit parameters by pressing specific keys simultaneously.
General