7/ THE SELECTOR KNOBS / PROGRAMMING
57
EN
••THE SELECTOR KNOBS
The 2 selector knobs are used for the various programmes :
The first to select :
• the food type
• the function
the second to programme :
• the length of the programme
• the weight of the food
••PROGRAMMING
Your microwave oven is now plugged in
and the clock is set.
Open the door. Set the dish inside, close the
door. If the door is not properly shut, the
appliance will not operate.
• 3 beeps announce the end of a programme.
The beeps are repeated every minute for 10
minutes until you open the door.
• If you think there is insufficient space
for the dish to turn freely inside the oven,
press the STOP TURNTABLE key
before or during the programme.
• If there is an error in the programming,
press the CANCEL key C twice.
Food type
selector
Time /
weight selector
To Next Page
Loading...
