96
4. OPERATION
4.1. Operation principle and description:
The machine dries the fibres passing hot air through the textile fibres. This air drags the humidity
and sends it to the outside.
Steps for correct drying:
Choose the same type of fibre. Do not mix different types of fibres in a drying
cycle.
Load the dryer.
Open the power supplies to the machine.
In the case of an analogue machine:
o Choose the drying duration using the timer.
o Choose the right temperature using the thermostat.
Or in the microprocessor version:
o Choose the drying programme using the microprocessor where all
the parameters for an optimum drying appear. (digital version)
Push the START cycle button.
Remove the load at the end of the cycle.
WARNING. REMOVING THE LOAD WITHOUT CARRYING OUT THE COOL-DOWN
(PROGRESSIVE COOLING) MAY CAUSE BURNS AND DAMAGE THE APPLIANCE.
Note: For coin- or token-operated self-service machines, please see point 9.
To Next Page
Loading...