Fairford XFE Series - Menu Structure Overview

6 M-85E0-F O81121
*1 The “Firing mode” must be set to ‘1’ for the In-Delta configuration.
*2 The “Cooling time” is dependant on the Model range, Duty rating and Heatsink temperature.
*3 The “Rated current” setting is for reference only and is not user adjustable.
*4 “P106 Start Class” is either factory pre-set on set by the user on Initial Start-up.
Stopped and ready
1:
Settings
Default (keypad)
Small Pump
Large Pump
Conveyor
Low Inertia Fan
High Inertia Fan
Recip Compressor
Screw Compressor
Rotary Compressor
Crusher
Grinder
Hi torque start
Motor gen set
Aerator
Flywheel press
Moulder
Default Auto
Current
Optimise rate (5)
Kick start (Off)
Kick pedestal (75%)
Kick time (25cycles)
Dwell time (5s)
Low volts stop (Off)
Contactor delay (160ms)
Trip sensitivity (1)
Station number (1)
(0) *1
Stop smoothing (5)
Cooling (On)
Cooling time *2
Line contactor (On)
Thermistor Trip (Off)
P126 Comms Trip (On)
Optimise+ (Off)
Firing mode
Full
Full + optimise (Default)
Start + bypass
Phase loss only
Power
Protection (full + optimise)
Current
P27 Peak Start
P40 supply volts (416)
Real PF
P22 Delay angle
P23 Max angle
P20 Reference PF
P21 Internal PF
Temperature I/P
Enter password
Change password
Save parameters
Power on parameters
Default parameters
Applications
Auto features
Basic
Advanced
Monitoring
Permanent store
Permanent store
Password
Password
Inputs
Outputs
Parameters
Trips
Auto features
Basic
Settings
Auto Jog (Off)
Auto Pedestal (Off)
Auto end start (Off)
Auto stop (Off)
Auto end stop (Off)
Auto bypass (On)
Auto 3MC (On)
Auto Ramp (Off)
Auto All >> Off
Stop smoothing (Off)
ENTER ENTERENTER ENTER
Rated current (Ie) *3
P106 Start Class *4
Low current (Off)
Low amps level (0.1xFLC)
Low amps time (50cycles)
C/L time out (On)
Current limit (3.5xIe)
Limit time out (30s)
Shearpin (On)
Shearpin level (3.125xIe)
Shearpin time (100cycles)
Overload level (1.1xIe)
# #
#
#
Advanced
Monitoring
Disable starter?
Enable starter
Starting (Keypad)
Start pedestal (20%)
Start time (5s)
Stop pedestal (10%)
Stop time (0s)
Current limit (3.5xIe)
Power on Param
Protection (Full +Optimise)
Starter Disabled
1:q to Enable
Menu structure
Typical Keypad menu. Contact Fairford for more details.