For users
- 8 -
② Screen lock:
a. If no operation in 30 seconds, screen will be locked.
b. When HP is off, screen will be dark and “0%” or “0.00
kW
” will be displayed.
c. Press for 3 seconds to lock screen and it will be dark.
③ Screen unlock:
a. Press for 3 seconds to unlock screen and it will be lit up.
b. Only after screen is unlocked, any other buttons can be functioned.
1. Power On: Press for 3 seconds to light up screen, then press to power on
heat pump.
2. Adjust Set Temperature: When screen is unlocked, press or to display or
adjust the set temperature.
3. Switching of real-time power consumption and heating capacity percentage
To Next Page
Loading...
Need help?
General