Fairland X20-09C User Manual

For users
- 10 -
2.3.2. Parameter Modification
In “Parameter Checking” status, press to enter the “Parameter Modification”
mode, press or to change the values, then press to confirm and quit
“Parameter Modification” mode, press to quit “Parameter Checking” status.
2.3.3. Parameter list
NO.
Content
Adjust range
Step length
P0
Water Pump Running Way
0: Continuous
1: Water temp control
2: Time/water temp
control
1
P1
Time Setting
(Only available when the
water pump running way is
set to “2”)
10 ~ 120 min
5 min
P2
Compressor Continuously
Running Time between
Defrosting Mode
30 ~ 90 min
1 min
P3
Defrosting Entry Temp
-17~0°C / 1~32°F
1°C /1°F
P4
Maximum Defrosting
Running Time
1 ~ 12 min
1 min
P5
Defrosting Exit Temp
8~30°C /46~86°F
1°C /1°F
2.3.4. Running status checking
Press for 5 seconds, enter into “Running status checking”, and the screen
alternately shows status point “C0” and its corresponding value. Check all status
points and their corresponding value through or , Press to quit
“running status checking” mode.
Running status checking list
Symbol
Content
Unit
C0
Inlet water temp.
°C / °F
C1
Outlet water temp.
°C / °F

Fairland X20-09C Specifications

General

Brand	Fairland
Model	X20-09C
Category	Swimming Pool Pump
Language	English