Fakir INOVAX - User Manual

Questions and Answers

R
Robert MillerAug 11, 2025
Why is the suction performance not sufficient on my Fakir Vacuum Cleaner?
- H
  hphillipsAug 11, 2025
  If your Fakir Vacuum Cleaner's suction performance is lacking, several factors could be the cause. First, ensure the regulation isn't set to position I; switch it to III. Also, empty the dust containers if they are full. Check for and remove any blockages in the accessories. If the filter is clogged, clean or replace it. Finally, a discharged battery can also cause insufficient suction, so recharge the battery.
B
Bradley NewmanAug 18, 2025
How to fix a Fakir INOVAX when the motor won't start?
- J
  Jay RivasAug 18, 2025
  If your Fakir Vacuum Cleaner motor won't start, there are a couple of things to check. First, make sure the battery is charged. If the battery is not the issue, ensure that the "" button is in the 0 position by pressing the "" button.
J
Jessica BentleyAug 26, 2025
What to do if my Fakir INOVAX is overheating?
- J
  jason19Aug 26, 2025
  If your Fakir Vacuum Cleaner is overheating, it's likely due to a soiled filtration system. Empty the dust containers and properly clean the filtration system to resolve this issue.
T
Tiffany YoungSep 2, 2025
What to do if my Fakir Vacuum Cleaner is not charging?
- R
  Richard JonesSep 2, 2025
  If your Fakir Vacuum Cleaner is not charging, first check if there's power in the electrical socket by ensuring the circuit breakers are on. If the socket is working, the charging adapter or its cord might be damaged. In that case, contact the authorised service centre.