USAGE
GB
19
Using with the blender
attachment
• Clean the attachment before using for the first time.
• Fit the attachment in to the main housing and turn it to
screw it fully into position.
• Place the attachment in the food to be beaten and press
the start / stop control and the operating safety button at
the same time.
• After the usage, unplug the appliance and turn the
attachment anticlockwise to unscrew it.
Using with the chopper
attachment
• You could use this attachment to mince meat or chop
greens, vegetables, cheese, dried fruits etc.
• Align the opening on the chopper blade with the rod in the
centre of the bowl and fit it in as far as it will go.
• Add the food to be chopped in to the chopper.
• Fit the main housing into the chopper cover by screwing
on it.
• Plug in and press the start-stop control
• Do not use hard foods such as coffee beans.
• When mincing meat ensure all bones or parts have been
removed.
• Allow cooked foods to cool down before chopping.
Using with the chopper
attachment
• You could use this attachment to beat and mix.
• Fit stainless steel mixer legs to the mount, pushing them
gently until fully in place.
• Fit into the main housing and turn assembly to screw it in
as far as it will go.
• Plug in after fitting the attachments to be used.
• Once connected, press the start-stop control.
• Make sure that the attachment can rotate freely in the
recipient.
• After finished the usage of the attachment, unplug the
appliance.
CAUTION!
Don’t operate food without water!
NOTE!
Using this attachment in a high density food, make sure
that work with intervals.
To Next Page
Loading...
