Fakir Nilco Premium 1107 User Manual (English)

Questions and Answers:

D
Donald CarrollAug 11, 2025
Why is my Fakir Nilco Premium 1107 not picking up dirt well?
- G
  Grant JonesAug 11, 2025
  If your Fakir Vacuum Cleaner isn't cleaning effectively, several factors could be the cause. It might be due to a full dust bag, which requires changing. The filter could be dirty or clogged, needing cleaning or replacement. There might be a clog in the nozzle, suction tube, or suction hose that needs to be cleared, possibly with a wooden stick. Check if the suction regulator is open and close it. Ensure the power setting matches your flooring type, and that you're using the correct nozzle for the floor. Finally, verify the 'carpet/hard floor' switch is in the right position.
M
Michael GarrisonAug 17, 2025
How to fix a Fakir Nilco Premium 1107 that won't turn on?
- A
  Adam DownsAug 17, 2025
  If your Fakir Vacuum Cleaner isn't working, first ensure the plug is properly inserted into a working mains socket and that the appliance is switched on. Test the vacuum cleaner at another power outlet to rule out a faulty socket. If the issue persists, the power cord may be damaged and should be replaced by an authorised Fakir service centre.
H
Heidi TorresAug 23, 2025
What to do if my Fakir Vacuum Cleaner suddenly stops?
- C
  Clarence HutchinsonAug 23, 2025
  If your Fakir Vacuum Cleaner suddenly stops, it may be due to the overheat protection being tripped. This can happen due to clogged suction channels or dirty filters. To resolve this, switch off and unplug the appliance. Eliminate the cause of overheating by clearing any blockages or cleaning the filters. Wait 30 minutes for the appliance to cool down before switching it on again.
T
theresaanthonyAug 29, 2025
Why is my Fakir Nilco Premium 1107 so loud?
- C
  Catherine WhiteAug 29, 2025
  If your Fakir Vacuum Cleaner is running unusually loud, it could be due to particles that have been sucked in and become jammed. Remove these particles, using a long wooden stick if necessary.
L
Leslie DuncanSep 5, 2025
How to troubleshoot a Fakir Nilco Premium 1107 when the brush is not working?
- C
  Cory SellersSep 5, 2025
  If the brush on your Fakir Vacuum Cleaner is not working, check if the connecting cable [D] is loose or not connected and connect it correctly. Also, ensure the suction tube is properly inserted.