fakro ZWS230 User Manual

Fakro
Chain Drive for Pivot Windows (230V)
SKU: FAK_ZWS230
Quickstart
This is a secure Window Control (endpoint aware) for Europe. To run this device please connect it to your mains power supply.
Inclusion and Exclusion are confirmed by a single click on the programming button. If the Fakro Chain Drive is not included into any Z-Wave network, the
LED is on continually.
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
(For more information about frequency regulations please refer to the frequency coverage overview at Sigma Designs Website ).
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for
other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as
both are suited for the same frequency range.

fakro ZWS230 Specifications

General

Brand	fakro
Model	ZWS230
Category	DC Drives
Language	English

Summary

Quickstart and Z-Wave Overview

Quickstart Guide

Basic steps to get the device running and included in a Z-Wave network.

What is Z-Wave?

Explanation of the Z-Wave wireless protocol for smart home communication.

Product Details and Safety

Product Description

Key features and specifications of the Fakro Chain Drive for Pivot Windows.

Safety Warning for Mains Powered Devices

Critical safety precautions for installation and operation of mains powered devices.

Installation and Network Integration

Prepare for Installation / Reset

Steps required before installation, including device reset for inclusion.

Installation Instructions

Guidance on physically installing the ZWS motor for roof windows.

Inclusion/Exclusion Process

Procedure for adding (inclusion) or removing (exclusion) the device from a Z-Wave network.

Device Operation and Functionality

Product Usage

How to operate the ZWS230 motor using a Z-Wave controller.

Manual Operating Mode

Instructions for controlling the motor directly via its manual operating button.

Association Groups

Details on setting up device-to-device control relationships within Z-Wave.

Technical Information and Troubleshooting

Technical Data

Specifications including dimensions, weight, device type, and Z-Wave versions.

Quick Trouble Shooting

Tips for resolving common issues encountered during network installation.