FALCOM BOLERO-LT - Page 7

BOLERO-LT Hardware Description Version 1.0.0
entries, unauthorized movement, etc. BOLERO-LT contains a data-logger that
enables it to archive unique locations in sequence for up to 45 days for later
analysis and evaluation (for example, archive interval up to 20 sec.).
The physical interface to the terminal application is made through a 6-pin
connector. It provides a serial interface giving you maximum flexibility for local use
such as controlling the terminal, receiving GPS location data, transferring data.
Figure 1 shows the front and top side of the BOLERO-LT covered with a protection
rubber.
Figure 1: BOLERO-LT covered with a protection rubber
BOLERO-LT terminal can be implemented into any asset platform, including:
- Trailers
- Trucks
- Delivery vans
- Rail cars
- as well as other industrial monitoring installations.
and it can be used in a variety of applications, including:
• Real time online tracking
• Fleet management / monitoring
• Security / emergency services
• Real time satellite navigation
• Territory management
• Personalized drivers logbook
• Route verification
• Trip management / distance calculations
• Theft protection
• Toll collection / pay as you drive
BOLERO-LT - EVALKIT provides an easy and efficient way to evaluate and configure
all system parameters of the mobile client. The configuration of the BOLERO-LT can
be done locally via serial link or remotely via the GSM/GPRS network. The BOLERO-
LT concept reduces the efforts for the creation of a turn key tracking and security
solution to the definition of the server (dispatcher) application. In this way the time-
to-market, the design-in risk and the total cost of solution are substantially reduced.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 7