Need help?Do you have a question about the Falcon 1080P HD Car Dash Cam and is the answer not in the manual?
General| Field of View | 170 degrees |
|---|---|
| Loop Recording | Yes |
| G-Sensor | Yes |
| Motion Detection | Yes |
| Parking Monitoring | Yes |
| Night Vision | Yes |
| Power Source | 12V car adapter |
| Mounting | Suction cup |
| Video Resolution | 1080P Full HD |
Important notes regarding MicroSD card, formatting, insertion, power, and accessories.
Diagram showing the physical components of the dash camera.
Records until card is full, overwriting oldest files in 3-minute chunks.
Automatically starts recording when motion is detected while connected to external power.
Automatically locks current recording if an external force or impact is detected.
Long press the power button for 2-3 seconds to turn the device on or off.
Manually start or stop recording by short pressing the OK button.
Short press the OK button in photo mode to capture a still image.
Short press OK to play video in playback mode; use UP/DOWN to browse files.
Use Menu, Power/OK, Up, and Down buttons for navigation and selection.
Shows the REC icon, start/stop recording via Power/OK button.
How to switch to photo mode and capture images, maintain steady hold.
Switch to playback mode and use UP/DOWN buttons to browse recorded files.
Options to delete single/all files or lock/unlock files from overwriting.
Configure Time, Auto Power-Off, Screen savers, and Beep sound.
Set menu language, flicker frequency, format card, and reset system.
Adjust resolution, cyclic record duration, EV, and motion detection.
Configure parking wake, audio, date tag, G-sensor, resolution, and image quality.
Troubleshooting tips for 'SD card Full' indication.
Diagnosing issues with the camera turning on and off continuously.
Solutions for camera freezing, often related to memory card performance.
To Next Page
