The boat has a serial number, the CIN-code. The CIN-code is marked on the right side of the back of the hull of
the craft. Write down the CIN-code in the chart below. When you contact the manufacturer or retail dealers, tell
them the CIN-code as well as the type of the boat to ensure that you get the suitable spare parts. If you need gel
coat for repairs give the code for the colour when ordering. Part of the information can be found on the
manufacturer's plate attached to the boat. A full account of the information is given in the relevant parts of this
handbook.
Technical information:
CIN-code
Engine serial number
Plate serial number
Main drive serial number
Deck material Polyester-resin/
glass-fibre reinforced plastic
Hull material
5083 Aluminium
Engine power and maximum speed:
Maximum recommended engine power 44,2 kW (60 hp)
Maximum speed with the strongest
engine recommended
app. 31 knots
Fire extinguisher:
Extinguisher Kidde 13 A 70 BC 2 kg
Bilge pump:
Pumping effect as given by manufacturer
Main measurements:
Electric bilge pump
Color codes:
39 l/min
Hull length
Draught with maximum allowed load
4,70
m
0,38
m
Grey Ral 7016
Maximum height from sea level
1,25
m
Weight information:
Weight without engine
500
kg
Weight of biggest recommended engine
(Mercury 60)
165
kg
Trailer weight
640
kg
Max. recommended nr. of people on board
5
425
kg
Maximum recommended load
including the weight of passengers
Tank capacities:
Fresh water tank*
Total weight, fully laden
Electrical system:
Battery capacity:
Start battery
426
kg
- l
1026
kg
95 Ah
*Optional
For production engineering reasons there might be a slight difference in the main measurements and volumes
compared to your vessel. Part of the equipment in the technical part of the handbook might be available as
accessories, not as standing fittings.
Due to trim and slant, the full capacity of tanks cannot always be used. Keep a fuel container ready to top up,
with about 20 % of the tank capacity.
To Next Page
Loading...