Falcon F2+ - Transmitter and Battery Care

FALCON F  + USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 45
TRANSMITTER AND BATTERY CARE
STEP 1 OF 6
Remove the transmitter from the drill head.
STEP 2 OF 6
Wipe the transmitter clean so dirt doesn ’ t enter the battery compartment or
accumulate on the battery cap threads.
STEP 3 OF 6
Remove the transmitter batteries to power it o ff .
The transmitter records run-time for warranty purposes.
STEP 4 OF 6
Inspect the battery compartment, springs, cap, O-ring, battery adapter, and
threads for debris. Clear any debris and replace the battery cap.
Use conductive lubricant on the threads if the battery cap is
di ffi cult to turn.
STEP 5 OF 6
Store batteries so they do not contact metallic objects or terminals of other
batteries.
STEP 6 OF 6
Store the transmitter in the original system carry case where it will be safe
from impact and excessive temperatures.