Falcon F2+ - Page 52

FALCON F  + USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 52
The Falcon Compact display does not support Target Steering.
TARGET STEERING
STEP 1 OF 7
Toggle up from the Locate Mode screen.
STEP 2 OF 7
The number on the screen
shows the last
set. If it matches
your desired target depth,
select the checkmark.
STEP 3 OF 7
To change the target depth
shown, use the keypad.
If TrakStand HAG is enabled, but drilling shallower than 0.5 m,
adjust the TrakStand HAG height.
If using standard HAG and holding the locator to distance from
rebar or drilling shallower than 0.5 m, add the height to the
target depth since standard HAG is ignored for Target Steering.
target
depth
*