EasyManua.ls Logo

Falcon Hybrid - User Manual

Falcon Hybrid
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HYBRID
INSTALLATION &
OPERATION MANUAL
Question and Answer IconNeed help?

Do you have a question about the Falcon Hybrid and is the answer not in the manual?

Summary

Introduction to Falcon Hybrid

Falcon Hybrid Features and Functions

Reporting Options

Details GSM, GPRS, and VHF radio reporting capabilities, including dual SIM support.

Interfaces

Covers hardwired inputs, relay outputs, Contact ID, and serial interfaces.

Programming Methods

Explains onboard and PC-based programming methods for the Falcon Hybrid.

Indicators and Controls

Describes the 7-segment display for status and error indications.

Falcon Hybrid Installation

Falcon Hybrid Wiring

Illustrates the connections required for the Falcon Hybrid, including power, inputs, outputs, and communication ports.

GSM Connection and SIM Management

Establishing GSM connection, signal strength, and changing default SIM cards.

Alarm Panel Serial Port Selection

Steps to select and configure serial port formats for different alarm panels.

Status Indicators and Controls

Explanation of the 7-segment display for status, errors, and network connection.

Falcon Hybrid Programming

Onboard Push-Button Programming

Using the onboard push-button for configuration tasks like serial port selection.

PC-based Programmer Setup

Guide to installing and using the Falcon Hybrid configuration software.

Appendix A: Serial Interface

Serial Interface Cables and Adapters

Lists compatible alarm panels, required adapters, and interface cable details.

Appendix B: Programming Cable and Software

Installing Drivers and Software

Instructions for installing drivers and the Falcon Hybrid configuration software.

Software Configuration and Operation

Guide to setting up the Falcon Hybrid configuration software and its operation.

Summary

Introduction to Falcon Hybrid

Falcon Hybrid Features and Functions

Reporting Options

Details GSM, GPRS, and VHF radio reporting capabilities, including dual SIM support.

Interfaces

Covers hardwired inputs, relay outputs, Contact ID, and serial interfaces.

Programming Methods

Explains onboard and PC-based programming methods for the Falcon Hybrid.

Indicators and Controls

Describes the 7-segment display for status and error indications.

Falcon Hybrid Installation

Falcon Hybrid Wiring

Illustrates the connections required for the Falcon Hybrid, including power, inputs, outputs, and communication ports.

GSM Connection and SIM Management

Establishing GSM connection, signal strength, and changing default SIM cards.

Alarm Panel Serial Port Selection

Steps to select and configure serial port formats for different alarm panels.

Status Indicators and Controls

Explanation of the 7-segment display for status, errors, and network connection.

Falcon Hybrid Programming

Onboard Push-Button Programming

Using the onboard push-button for configuration tasks like serial port selection.

PC-based Programmer Setup

Guide to installing and using the Falcon Hybrid configuration software.

Appendix A: Serial Interface

Serial Interface Cables and Adapters

Lists compatible alarm panels, required adapters, and interface cable details.

Appendix B: Programming Cable and Software

Installing Drivers and Software

Instructions for installing drivers and the Falcon Hybrid configuration software.

Software Configuration and Operation

Guide to setting up the Falcon Hybrid configuration software and its operation.

Falcon Hybrid Specifications

General IconGeneral
Device TypeModem
Technology4G LTE
Download Speed150 Mbps
Upload Speed50 Mbps
Frequency BandsLTE: B1/B3/B7/B8/B20/B38/B40
Wi-Fi802.11 b/g/n