FALK Navigator 10 - User Manual

Questions and Answers

M
Monica ClarkAug 13, 2025
What to do if my FALK GPS navigation device will not start?
- D
  Derrick GuerreroAug 13, 2025
  If your Falk GPS navigation device won't start, first ensure the ON/OFF switch at the bottom or back is in the ON position. If it remains unresponsive, the battery might be too low. Connect the device to a power source; it should automatically start after a few minutes. Charging may take up to 24 hours. If storing the device for an extended period, use the OFF switch to conserve battery.
B
brandonrobertsAug 17, 2025
Why does my FALK GPS have no GPS reception or interrupted GPS reception?
- A
  Amanda StokesAug 17, 2025
  If your Falk GPS is not receiving a GPS signal, or the reception is interrupted, this can be due to vaporized windscreens, dense buildings, or heavy cloud cover. Try repositioning your device. Remember that at least 4 satellites are needed for navigation. You can check this information under “Settings” -> “GPS Info.” If you've performed a hard reset (ON/OFF switch), all GPS settings are reset, and it may take up to 30 minutes to establish a GPS fix when the device is stationary under a clear sky.
Z
zbennettAug 21, 2025
Why is the speed camera detector not available or not working on my FALK GPS?
- P
  Peter RichardsonAug 21, 2025
  If your Falk GPS is not detecting speed cameras, first ensure that the speed camera detector is installed manually via the Navi-Manager. Also, the speed camera detector has to be activated again and confirmed on the navigation menu each time that you navigate somewhere.
S
swillisAug 25, 2025
How to fix no TMC / TMC Pro reception on my FALK GPS?
- A
  Anne OconnorAug 25, 2025
  To resolve the issue of no TMC/TMC Pro reception on your Falk GPS device: * First, check in the settings under 'TMC' to ensure that TMC/TMC Pro has been enabled. * If the reception is poor, use the supplied dipole antenna to improve it. * Verify the dipole antenna is correctly plugged into the navigation device and that the cable is properly attached to the windscreen as described in the operating manual.
T
Tanner AyalaAug 28, 2025
Why doesn't the speed alert work or is not permanently displayed on my FALK GPS?
- E
  esnyderAug 28, 2025
  If the speed alert on your Falk GPS isn't working or isn't permanently displayed, make sure the speed alert is enabled in the navigation menu. Also, remember that speed warnings need to be recorded manually and are not 100% available, similar to map data.
F
Franklin MorseAug 31, 2025
What to do if the destination to be searched for cannot be entered on FALK GPS?
- C
  Carlos HarrisonSep 1, 2025
  If you cannot enter the destination you're searching for on your Falk GPS, check if the relevant detailed map is supplied with your product or is preinstalled. If the city, street, or street number isn't stored in the map data, choose a neighboring city, street, or street number in the input mask. Alternatively, manually set the destination point on the 'Map' screen.
W
williamsjessicaSep 4, 2025
Why are street names not announced on my FALK GPS?
- S
  scott90Sep 5, 2025
  If street names are not announced on your Falk GPS, ensure that the text-to-speech function is enabled on the navigation menu.
B
Becky VanceSep 8, 2025
Why is reality view not available or not working on my FALK GPS?
- S
  Stacey KelleySep 8, 2025
  If the reality view feature is not available or not working on your Falk GPS, ensure that reality view is enabled in the menu.