Faller 120217 User Manual

Sa. Nr. 221 238 0
E-Lokschuppen
Electric engine shed
Hangar à locomotives électrique
Locloods voor elektrische tractie
Art. Nr. 120217
Stromverbrauch:
Current consumption:
Consummation de courant:
Stroomverbruik:
6 x 35 mA
Art.180671
Vor Beginn des Bastelns sollten Sie sich mit den Spritzlingen und der Anleitung vertraut machen.
Sollte es einmal vorkommen, dass ein Teil im Bausatz fehlt, kreuzen Sie bitte das fehlende Teil in
der Anleitung an und schicken Sie diese bitte an Fa. Gebr. FALLER GmbH, Abt. Kundendienst,
Kreuzstraße 9, 78148 Gütenbach. Sie erhalten dann umgehend Ersatz.
In diesem Bausatz sind einige Kunststoffteile übrig.
Before commencing with the assembly please familiarize yourself with the parts and read the
instructions carefully.
In case of missing parts please indicate these on the instructions leaflet with a circle and return
the leaflet to Gebr. FALLER GmbH, Kreuzstraße 9, D-78148 Gütenbach, Germany.
You will receive the replacement by return.
Some of the parts in this box are not needed to construct the model.
Avant de commencer le montage de votre maquette bien lire la notice et repérer les grappes.
Si une pièce manquait dans une boîte, cochez la pièce correspondante sur la notice et renvoyez
la nous à Gebr. FALLER GmbH, Kreuzstraße 9, D-78148 Gütenbach (R.F.A.).
Nous vous ferons parvenir la pièce par retour.
Dans cette boîte se trouvent quelques pièces qui ne seront pas utilisée pour le montage.
Vóór het bouwen zou men de gietstukken en de handleiding moeten bestuderen.
Indien onverhoopt een onderdeel aan het bouwpakket ontbreekt, gelieve men het ontbrekende
deel in de handleiding aan te kruisen en deze te zenden aan Gebr. FALLER GmbH, Kreuz-
straße 9, D-78148 Gütenbach. U ontvangt dan omgaand en gratis het ontbrekende onderdeel.
Van dit bouwpakket worden enkele kunststof delen niet gebruikt.
D
F
GB
NL
Art. Nr. 170688
Spezial-Seitenschneider
zum gratfreien Abtrennen von
feinsten Spritzteilen.
Nur für Polystyrol geeignet.
Special side cutter
for cutting off ultra-fine moulded
parts without burrs.
Only suitable for polystyrene.
Pince coupante spéciale
pour couper sans bavure les
pièces miniatures moulées par
injection.
Uniquement appropriée pour le
polystyrène.
Speciale zijkniptang
voor het braamloos afknippen
van de fijnste gietstukdelen.
Alleen geschikt voor polystyrol.
Art. Nr. 170492
FALLER-EXPERT
Flüssigkleber in Plastikflasche mit
Spezialkanüle für feinste Klebstoff-
dosierung.
FALLER-EXPERT
Liquid cement in plastic bottle with
canule for very fine dosage.
FALLER-EXPERT
Colle liquide en bouteille plastique
avec bec verseur pour un dosage
précis.
FALLER-EXPERT
Vloeibare lijm in plastic-flacon met
doseerbuisje om nauwkeurig te
lijmen.
Für den Zusammenbau des Modells empfehlen wir folgende FALLER-Artikel (sind nicht im Bausatz enthalten):
For the assembly of the kit we recommend following FALLER products (not included in the kit):
Pour l’assemblage du modèle, nous vous recommandons les articles FALLER suivants (non inclus dans le kit):
Om dit model te bouwen adviseren wij de volgende FALLER producten (maken geen deel uit van deze bouwset):
Inhalt Spritzlinge
Contents Sprues
Contenu Moulages
Inhoud Gietstukken
1
2
x
2
2
x
3
3
x
4
6
x
5
3
x
6
4
x
4
x
23AB
4
x
26A
8
x
26AC
4
x
26C
8
x
21AB

Faller 120217 Specifications

General

Era	III
Material	Plastic
Assembly Required	Yes
Brand	Faller
Scale	H0

Summary

E-Lokschuppen: Introduction and Accessories

General Assembly Instructions

Multilingual instructions for preparation and part replacement.

Recommended Tools and Adhesives

Lists specific FALLER tools and glues for optimal assembly.

Base Frame Construction

Assemble Base Component A (3x)

Step-by-step guide for assembling three units of base component A.

Assemble Base Component B

Step-by-step guide for assembling base component B.

Wall Panel Assembly - Part 1

Assemble Wall Panel C (2x)

Instructions for assembling two units of wall panel C.

Assemble Wall Panel D (2x)

Instructions for assembling two units of wall panel D.

Assemble Wall Panel E (2x)

Instructions for assembling two units of wall panel E.

Assemble Wall Panel F (2x)

Instructions for assembling two units of wall panel F.

Wall Panel Assembly - Part 2

Assemble Wall Panel G (2x)

Instructions for assembling two units of wall panel G.

Assemble Wall Panel H (4x)

Instructions for assembling four units of wall panel H.

Assemble Wall Panel I (4x)

Instructions for assembling four units of wall panel I.

Roof and Support Structure Assembly

Assemble Roof Panel J (2x)

Instructions for assembling two units of roof panel J.

Assemble Support Beam K (2x)

Instructions for assembling two units of support beam K.

Assemble Base/Frame Components (L, M, N)

Instructions for assembling base and frame components L, M, and N.

Main Structure Integration

Connect Main Frame and Walls

Connecting structural frames with wall panels and supports.

View of Assembled Main Structure

Visual representation of the assembled main structure.

Detailing and Alignment

Scratch Line Guide for Component B

Detailed instruction for scratching lines on component B for alignment.

Scratch Line Guide for Component Q

Detailed instruction for scratching lines on component Q for alignment.

Attach Components R and S

Instructions for attaching components R and S to the main structure.

Panel Attachment Stages

Attach Panel K to Structure T

Instructions for attaching panel K to the main structure at stage T.

Attach Panel K to Structure U

Instructions for attaching panel K to the main structure at stage U.

Decorative and Final Panel Assembly

Attach Decorative Elements (V)

Instructions for attaching decorative elements labeled V.

Complete Structure with Panel W

Instructions for completing the structure with panel W.

Track Integration for Märklin C

Prepare Track Components X

Instructions for preparing components X for Märklin C track.

Install Track Components Y

Instructions for installing track components Y onto the structure.

Roof Panel Construction

Assemble Roof Panel 'a'

Instructions for assembling roof panel 'a' using part 5/1.

Join Roof Panels 'b' (2x)

Instructions for joining two units of roof panel 'b'.

Assemble Main Roof Section 'c'

Instructions for assembling the main roof section 'c'.

Base and Detail Components

Assemble Corner Pieces 'd' (6x)

Instructions for assembling six units of corner piece 'd'.

Assemble Support Pieces 'e' (6x)

Instructions for assembling six units of support piece 'e'.

Assemble Base Tray 'f' (3x)

Instructions for assembling three units of base tray 'f'.

Complete Base Assembly 'g'

Instructions for completing the base assembly 'g'.

Sub-Assembly Construction

Assemble Component 'h' (6x)

Instructions for assembling six units of component 'h'.

Assemble Component 'i' (3x)

Instructions for assembling three units of component 'i'.

Assemble Components 'j' & 'k'

Instructions for assembling components 'j' (3x) and 'k' (12x).

Assemble Component 'l' (3x)

Instructions for assembling three units of component 'l'.

Final Assembly Stages

Assemble and Attach Component 'm'

Instructions for assembling and attaching component 'm'.

Attach Component 'n'

Instructions for attaching component 'n'.

Attach Component 'o'

Instructions for attaching component 'o'.

Integrate Final Assembly 'W'

Instructions for integrating part W into the final assembly.

Detailed Assembly Steps

Attach Component 'p' - Section 1

Instructions for attaching component 'p' in the first section.

Attach Component 'q'

Instructions for attaching component 'q'.

Attach Component 'p' - Section 2

Instructions for attaching component 'p' in the second section.

Further Assembly Details

Attach Component 'r' - Section 1

Instructions for attaching component 'r' in the first section.

Attach Component 'n' - Section 1

Instructions for attaching component 'n' in the first section.

Attach Component 'r' - Section 2

Instructions for attaching component 'r' in the second section.

Attach Component 'n' - Section 2

Instructions for attaching component 'n' in the second section.

Overhead Line Preparation

Prepare Component 't' (6x)

Instructions for preparing six units of component 't' for overhead line.

Integrate Overhead Line Parts 'u' and 's'

Instructions for integrating components 'u' and 's' into the structure.

Final Overhead Line Structure 'v'

Steps for completing the final overhead line structure.

Overhead Line Operations and Variants

Overhead Line Operation Details (W)

Details on overhead line operation and component W.

Connect Overhead Line Components (V)

Instructions for connecting components V for overhead lines.

Alternative Overhead Line Setup (X)

Instructions for an alternative overhead line setup (X).

Model Variants and Wiring Guide

Variant Art. Nr. 180624 Cable Info

Information on model variant Art. Nr. 180624, including included cables.

Final Structure Assembly 'Z'

Instructions for completing the final structure assembly 'Z'.

Electrical Unit Operation

Using Art. Nr. 180624 for Doors

Instructions for operating doors with Art. Nr. 180624, covering button functions.

Connect Art.-Nr. 180641 Transformer

Details on connecting the Art.-Nr. 180641 Transformer (16 V).

Electrical Variants and Connections

Wiring for Variants 180624 + 161679

Wiring information for model variants Art. Nr. 180624 and 161679.

Final Roof Wiring Points

Shows final roof assembly and indicates wiring connection points.

Electrical Component Schematics

Art. Nr. 180624 Control Unit Diagram

Diagram illustrating connections for Art. Nr. 180624 control unit.

Art. Nr. 161679 Switching Unit Diagram

Diagram illustrating connections for Art. Nr. 161679 switching unit.

Transformer and Start Contacts Wiring

Wiring details for transformer and start contacts (Start 1L/1R).

Operational Modes and Control Functions

Functional Description (German)

Explains operational logic and control functions in German.

Operating Mode Explanation (English)

Explains operational logic and control functions in English.

Operating Principle Explanation (French)

Explains operational logic and control functions in French.

Bedieningsinstructies (Dutch)

Explains operational logic and control functions in Dutch.

Completed Model Showcase

Final E-Lokschuppen Assembly View

Shows the fully assembled E-Lokschuppen model from an isometric perspective.