5.0 Installaon and Use
MDRE01 Rev B 112618
NOTE:
DO NOT
5.1 Anchorage Locaon:
DO NOT
5.2 Fall Clearance Distance:
Figure 4: Minimum Required Fall Clearance:
D-Ring Extender and 6 Energy Absorbing Lanyard
A
Length of Shock Absorbing Lanyard
B
Elongaon/Deceleraon Distance
C
Length of D-Ring Extender (18”)
D
Harness Stretch and Dorsal D-Ring Shi
E
Height of Dorsal D-ring
F
Safety Factor
G
Total Minimum Clear Fall Distance Required
NOTE: Use of an extender will increase the users potenal fall distance. The user must be sure the increased total length of a lanyard is
accounted for in calculang fall clearance distances, including swing fall. Be aware that when using an SRL, there may be addional fall clearance
required depending on anchor point locaon. If unsure, consult a Competent Person.
B
D
E
Figure 5 - Swing Fall Hazards: Overhead
5.3 Swing Fall:
To Next Page
Loading...