Do you have a question about the FALMEC NUVOLA and is the answer not in the manual?
Noise level | - dB |
---|---|
Pressure (Pa) | 560 |
Number of speeds | 4 |
Type of extraction | - |
Noise level (low speed) | 45 dB |
Noise level (high speed) | 65 dB |
Minimum distance from electric hob | 1500 mm |
Type | Ceiling built-in |
Product color | Stainless steel |
Built-in display | No |
Exhaust location | Top |
Housing material | Glass, Stainless steel |
Exhaust connection diameter | 150 mm |
Bulb type | Neon |
Bulb power | 58 W |
Number of bulbs | 2 bulb(s) |
Removable filter | Yes |
Grease filter type | Metal |
Annual energy consumption | - kWh |
Depth | 625 mm |
---|---|
Width | 1358 mm |
Height | 347 mm |
Installation compartment depth | 590 mm |
Installation compartment width | 1325 mm |
Crucial safety information for appliance installation and operation.
Key safety measures for electrical systems and appliance usage.
Detailed technical specifications and data of the range hood.
Recommended distances, ducting, and installation requirements.
Step-by-step instructions for qualified personnel on electrical connections.
Instructions for using the range hood with an outside discharge.
Guidance for the recirculating range hood with filters.
How to operate the electronic control panel and its functions.
Technical details and usage of the radio remote control.
Instructions for changing the radio control code due to interference.
Procedure for accessing and removing metal grease-trapping filters.
Note regarding the hood not being designed for charcoal filters.
Step-by-step guide for replacing the fluorescent light tube.
Recommended cleaning frequency and method for metal filters.
Guidelines for cleaning the external surfaces of the range hood.
Instructions for cleaning internal parts, avoiding liquids and abrasives.
Details on product warranty coverage, conditions, and exclusions.
Overview of the assembly process for the range hood.
Detailed steps for installing the range hood with an outside exhaust system.
Instructions for positioning and connecting a remote motor unit.