Installation:
Always check the device for damage before use. Use the original packaging or suitable transport
or storage packaging to protect the product optimally from influences such as dust or moisture,
etc. when not in use
Commissioning:
All connections of the device should be made before switching on. Only use high-quality,
undamaged and as short cables as possible for the connections.
Configuration of the 3-pin XLR connector:
FAME PS 100:
Extremely sturdy
Very compact
1 x female XLR input
1 x male XLR output
Power LED indicator
Power supply maximum current
Suitable for any studio environment where standardised equipment is not used.
Used if your preamplifier, mixer or audio interface does not offer the possibility of
capacitor supply.
The single-channel device therefore supplies condenser microphones with the
necessary 48 V phantom power.
To Next Page