5
Periphal Connections
Signal In Jacks
The SL30B features two different input jacks, which
you you will fi nd on the very left side of the panel.
They are titled with “Passive” and “Active”, and were
installed to transmit the signal of your bass perfectly
to the preamp of the amplifi er. If you play a bass
with high output pickups (i.e. humbuckers or active
systems), you should use the “Active” input. For the
usage with singlecoil equipped basses, we recom-
mend the “Passive” input.
FX-Loop
On the back of your amplifi er you will fi nd both a
send and a return jack. These will be useful if you
want to loop external effects units between preamp
and power amp of the SL30B. The built-in fx-loop
is serial type. This means that the signal path of the
SL30B is interrupted, the signal is sent to the effects
unit, gets processed and then sent back to the return
of the power amp.
Headphone
For quiet practicing at home you can also use
optional headphones. For best performance and a
brilliant sound, we recommend our Fame DT 790
studio headphones. Please note that the overall
volume of the amplifi er will infl uence the master
volume of your headphones.
CONNECTIONS ON THE BACK
Mains
This jack is used to connect the SL30B to a grounded
power outlet.
Your guitar cord is an important part of our signal chain and its quality and
construction type clearly affect the overall tone of your rig. Try and buy the
best quality cord you can or want to afford for maximum sound!
To Next Page
Loading...
