3. Safety instructions and warnings
Installation of and solving any malfunctions should only be carried out by an
authorised electro-installer, according to the prevailing regulations.
1. Check the actuator after unpacking for any transport damage. Report
any damage to your supplier immediately. Never install a damaged
actuator!
2. Read the safety instructions carefully before installing and using the
actuator.
3. Mount the actuator in the installation, before setting the installation into
operation.
Never touch any rotating parts of the actuator!
4. Check the actuator regularly for correct functioning.
5. Prevent electrostatic discharge (ESD)
Fancom cannot be held liable for any damage caused by
incorrect mounting and/or non-or partial functioning of the
entire installation.
If the product in whatever form or version is modified and/or
altered, any right to the guarantee and support offered by
Fancom will be become null and void.
To Next Page
Loading...
Need help?
General
