Fangscoo TK-202 - Usage: Password and Authorization

GPS / GSM / GPRS TRACKER
 After that, you can do all the settings as below.
5.2 INITIALIZATION
Send SMS command " begin+password " to initialize all the settings, for example
"begin123456". You will receive a reply as "begin ok!" if the setting is successful.
( 123456 is the default password ).
5.3 PASSWORD
Send SMS command " password+old password+space+new password " to
change the password, for example "password123456 790307".
Notice:
 Be sure to keep the new password in mind, you have to upload the software to
restore the original setting in case of losing the new password.
 Make sure the new password is in 6 digits, or else the the setting can't be
successful.
5.4 AUTHORIZATION
You can authorize total 5 numbers as authorized number. These numbers own the
rights to receive geo-info and alarm messages. Please do followings regarding the
authorization.
 Call the tracker or send SMS to the tracker, if you can get 10 replies from the
tracker, your number will be regarded as authorized number automatically.
 Send SMS command " admin+password+space+cell phone number " to set up an
authorized
number, for example "admin123456 13751187524". You will receive a
reply as "admin ok!" if the setting is successful.
 To delete an authorized number, send SMS command
"noadmin+password+space+ cell phone number", for example "noadmin123456
13751187524".
 For roaming purpose, you have to add your country code ahead of the phone
number.(Before setting the authorized number, all the numbers can get reply from
the tracker by calling or SMS command; after setting, only the authorized numbers
own the rights.If an un-authorized number call the unit, there will be no response
from the tracker.If an un-authorized number know the password, then it can set the
tracker. Since it can't set the authorized number, but it can send "begin123456" to
initialize the tracker, then all authorized number will be removed. So take care of
your password.)
BACK TO TOP)
6