Need help?Do you have a question about the Fantasy Spas Embrace and is the answer not in the manual?
Critical safety instructions to read and follow for safe spa operation.
Precautions and warnings related to child safety and supervision around the spa.
Guidelines and warnings to prevent electrical shock hazards.
Warnings about potential injuries, including sitting in the filter compartment and slippery surfaces.
Information on hyperthermia and its risks, especially with alcohol and drugs.
How to measure water temperature and test it before entering the spa to prevent burns.
General requirements for spa electrical installation, including NEC compliance and GFCI breakers.
Specific GFCI testing instructions for 115V cord-connected spa models.
Grounding and bonding requirements for 230V converted spa models.
Selecting the correct voltage (115V or 230V) and amperage for your spa setup.
Details on plugging a 115V spa into a grounded receptacle and avoiding extension cords.
Requirements for 30A GFCI Subpanel (115V) or 50A GFCI Subpanel (230V).
A diagram showing the wiring connections for a 230V spa installation.
Information on overheat conditions, what causes them, and how to address them.
Steps to prepare the spa for winter, including removing water from lines and using antifreeze.
Steps to diagnose issues when no spa components are operating.
Troubleshooting steps when the pump isn't working but the light is on.
How to address overheating issues and the "OH" message on the control panel.
General| Jets | 17 |
|---|---|
| Water Capacity | 220 gallons |
| Heater | 1kW / 120V or 4kW / 240V |
| Number of Jets | 17 |
| Insulation | Full Foam |
| Voltage | 240V |
| Cabinet Material | Polyethylene |
| Filtration | 50 sq ft |
| Control System | Digital |
To Next Page