Thank you for choosing the AIR-300.
We hope you enjoy using this device.
Parts of these instructions may differ slightly from the product or software.
The AIR-300 is a wireless Air Mouse with an integra- ted gyroscope and
acceleration sensor, an integrated keyboard and voice input. The AIR-300 can behave
like a conventional remote control, a computer mouse, a computer keyboard and a
gaming motion controller. The plug-and-play USB receiver is compatible with PCs,
projectors, TV boxes, home theater media players, etc.
Description
The AIR-300 is an intelligent multifunctional input device. Use the AIR-300 as:
• wireless USB Air Mouse,
• wireless USB remote control with the typical control buttons,
• Google assistant with voice input,
• wireless USB keyboard on the back to enter letters, numbers and special characters,
• Motion controller with 6 directions of movement to use suitable games via USB,
• on your PC, an Android TV Box, Smart TV, HTPC and other USB capable devices.
Features
• Air Mouse with 6 axis motion sensors
• Voice input
• Keyboard with American keyboard layout
• USB receiver
• Learnable IR on-off switch
• Range up to 10m
• Integrated lithium battery
• Very low energy consumption
Service
Connect the device to a USB port or a charger with the supplied cable so that the battery is
charged. Take the USB receiver out of the packaging and connect it to the USB interface of
your PC, player or TV. When using it for the first time, wait 20-60 seconds for your system
to install the appropriate drivers. Turn on the AIR-300 using the slide switch by sliding the
switch forward. Rotate the AIR-300 so that the keyboard is facing down and move the
remote control. The mouse pointer will move.
If the mouse pointer is not visible, please press the " " button once (1x), move the
remote control and check whether the pointer appears.
If this is not the case, please repeat - only press once (1x).
Keyboard use
• Fn key: briefly pressing the "Fn" key activates the blue Fn keys - the Fn LED lights up.
• Fn key again: switches the Fn function off again.
• "www..com" key: creates the text: .com. Together with the "Shift" key: www.
Voice input
In preparation, it may be necessary to install the "Google Assistant" app from the Google
Play Store. Follow the instructions of the "Google Assistant".
Additional apps may be necessary.
To start a voice-controlled search, press and hold the "voice input " button until the
software starts. Depending on your internet connection, this may take a few seconds.
Then speak into the microphone. The software exits automatically after a few seconds of
inactivity or after a search.
Teaching IR ON/OFF switch
Many players or Android boxes are controlled with IR (infrared) remote controls. These
devices can only be switched on by IR remote control. The AIR-300 has an integrated IR
switch-on function. This function must be matched to your remote control:
• Press the "OK" + "Power " button on the AIR-300 - the LED flashes quickly.
• Release the buttons - the LED lights up permanently.
• The remote control is now in IR learning mode.
• The AIR-300 now expects the IR signal of the "Power " button from the remote control
of your player. Hold this remote frontally against the AIR-300 and press the switch -
the LED flashes.
• Press the "Arrow left up " button - this ends the learning function.
• The programming is deleted by pressing the "OK" and "arrow " buttons.
Set up mouse speed
• Press the "OK" and "arrow " buttons to decrease the speed.
• Press the "OK" and "arrow " buttons to increase the speed.
Coordination of the receiver with the AIR-300 (Pairing)
Connect the USB receiver and press the "OK" and "Home " buttons on the AIR-300. The
LED starts to flash. As soon as the blinking stops, the pairing is finished.
Protection function when turning the keyboard
To avoid malfunctions:
• the mouse function is switched off and the keyboard is switched on as soon
as the keyboard is turned upwards.
• The keyboard is switched off and the mouse pointer is switched on again as
soon as the remote control is turned upwards.
Power saving mode
After 15 seconds of inactivity, the AIR-300 goes into an energy saving mode.
As soon as a button is pressed, the AIR-300 wakes up again.
Low battery indication
The LED provides information about the state of the battery:
• LED flashes slowly: battery must be charged.
• LED lights up permanently: battery is being charged.
• LED off: battery is fully charged.
Special function keys at the remote control
2.4 GHz and IR switch
Switch mouse function on or off
"Home" button
"Menu" button, if possible in the displayed environment
"Back" button
Volume down
Volume up
Voice control switch
Technical specifications
• Operating temperature: -20°C ~ 65°C
• Frequency: 2.4GHz ~ 2.4835 GHz
• Battery type: 400mAh / 3.7V lithium
• Power consumption operation: 9mA
• Standby power consumption: 25µA
• Total buttons: 58
• Keyboard keys: 45
• Maximum range: up to 10 meter
• Micro USB charging port
• Dimensions: 165 x 55.5 x 16.5 mm
• Net weight: 86.5 + -5g
• Supported operating systems: Android / Windows / Mac OS / Linux
Pay attention
Take the USB receiver and plug it into the USB port of your device (PC, TV, etc.).
With FANTEC media players typically in the USB2.0 port.
The AIR-300 uses a built-in lithium battery with a charging voltage of 5V. If the remote
control is not used for a long time, the battery will discharge and it will need to be
recharged before the AIR-300 can be used again. Use the cable provided for charging.
Avoid an extremely hot or extremely cold environment. Avoid contact with liquids.
Packaging content
• Remote control
• USB charging cable
• USB receiver
• Operating manual
AIR-300 AIR MOUSE
REMOTE CONTROL WIRELESS
USER MANUAL
v
+
v
-
FANTEC GmbH - Hamburg / Germany * made in China
Typing errors, errors and modifications are subjects to change.
GERMANY ∙ SINCE 1999
USB power input
Fn LED indicator
Fn
Ctrl
AltA ltGr
Home PgDn End
WWW.
.COM
PgUp
Ctrl+Alt+Del
Enter
1
[
+
=
1]
{ }
23 45 67 89 0
！
~@ #
￥
%^ &* ()
\< >, ”; :, .?
/
Esc
Caps
Shift
DelQW ER TY UI P
AS DF GH JK L
ZX CV BN M
BACK
v
+
v
-
OK
LED
microphone
ON/OFF switch
Home
back
mouse ON/OF F
menu
volume -
volume +
voice input
slide switch
To Next Page
Need help?
General