17
f) Format: After confirming that all files recorded are not needed to be saved, all files can be removed
by formatting.
Note:
If there is no card inserted, the memory of the unit will be formatted. After inserting a card, the system
will format the card, but not the internal memory unit.
g) Factory default: This operation is setting all parameter to factory default. The system will set the
display mode to English. Press “M” key to enter the menu selection, press “<” or “>” key to enter the
menu “Setup”, press “-“ key to select the option “Language”.
h) Language: “English” or “German” can be selected via left or right key.
i) Date/Time: The time can be adjusted. It will be displayed on the bottom right corner of the video file
or photo file when recording or shooting.
Note:
Press “M” key under the submenu to exit the settings of the submenu.
To Next Page
Loading...