Fantec BeastVision XHD - Audio Playback and File Management

23
d) Audio playback:
Enter “ ” interface and all files appear on the screen. Select the audio file by pressing “>” or “<” and
press “OK” to play. You can use the following functions.
+
Volume UP
-
Volume Down
1. Reset the playing from the beginning.
2. Press it again to return to playback interface.
OK
Play / Pause
Fast Forward/ Backward options are not available under audio playback mode.
7. Delete or protect files
In playback mode at first select the file and then press ”M” key. Now you can use the following
functions:
a) Delete file option. After pressing “OK” key you can select to delete a single file or delete all files.
Please confirm your selection by “ ” or cancel by “ ”.
b) Protect file option. All files can be set to protected or unprotected mode. After pressing “OK” key you
can select to protect/ unprotect a single file or protect / unprotect all files.
Note:
For protected files the icon “ ” will appear on the bottom left corner. Unprotected files will be
indicated by the icon “ ". It’s not possible to delete protected files by the unit itself. Either you
unprotect it again or you have to format the memory card.