Fantic Motor Caballero 125 Liquid Cooled User Manual

Provides a schedule for regular maintenance checks and lubrication tasks for the vehicle.

Procedure for measuring and adjusting valve clearance on a cold engine.

Steps to verify and inspect the engine's ignition timing using a timing light.

Guide to testing engine compression using a pressure gauge for diagnosis.

Instructions on how to properly check the engine oil level.

Detailed steps for draining old engine oil and refilling with new oil.

Procedure for setting the correct amount of free play in the clutch cable.

Step-by-step guide for disassembling and removing the cylinder head assembly.

Inspection steps for the cylinder head for damage or wear.

Instructions for correctly reassembling and installing the cylinder head.

Procedure for disassembling and removing the camshaft and rocker arm components.

Steps for correctly installing the camshaft and rocker arm assembly.

Guide to disassembling the cylinder head to remove valves and springs.

Procedure for dismantling the engine to remove the cylinder and piston.

Steps for correctly reassembling the piston into the cylinder.

Detailed steps for disassembling the clutch assembly.

Instructions for correctly reassembling the clutch components.

Procedure for splitting the engine crankcase halves.

Instructions for correctly joining and assembling the crankcase halves.

Procedure for disassembling the transmission system.

Guide to testing thermostat operation and temperature response.