Fantic Motor INTEGRA 140 TRAIL User Manual (English)

Mr. Tyler Lara DDSAug 1, 2025

Why is it not possible to activate the display on my Fantic Motor Bicycle?

P
pauljohnsonAug 1, 2025
If your Fantic Motor Bicycle display or power-assisted pedaling system won't activate, there could be several reasons. First, press the white button on the battery pack to ensure it's on; the charge level LEDs should light up. If not, the battery pack might be defective. Other potential issues include an overheated or discharged battery pack (recharge if needed, or wait until it cools down), incorrect battery pack installation (remove and reinsert it properly), damaged electrical contacts (clean with a soft, dry cloth), an incorrectly mounted display (reposition it), or a connector not properly inserted into the battery pack (insert correctly).

Brand	Fantic Motor
Model	INTEGRA 140 TRAIL
Category	Bicycle
Language	English

Brand

Fantic Motor

Model

INTEGRA 140 TRAIL

Introduction to Electric Bicycles

Meaning of EPAC

Explains the acronym EPAC (Electrical Power Assisted Cycle) and its regulatory definitions.

Understanding Bicycle Symbols and Declarations

Description of Symbols

Details the meaning of hazard, attention, and information symbols used in the manual.

Notes for Parents and Guardians

Highlights the responsibilities of parents and guardians for child users of the bicycle.

WEEE Declaration

Information on the responsible disposal and recycling of electrical bicycle components.

Safety Information and Warnings

General Safety Information

Provides essential guidelines for safe use, manual preservation, and documentation.

Correct Use Guidelines

Specifies approved riding surfaces and conditions for the bicycle.

Improper Use Warnings

Details risks associated with non-standard parts, modifications, and incorrect operations.

Legal Regulations Compliance

Emphasizes adherence to local traffic laws and regulations for EPAC bicycles.

Residual Hazards Explained

Identifies potential risks like fire, electrical shock, and mechanical hazards.

Electrical Hazards

Warns about risks from faulty electrical components and chargers.

Generic Hazards

Covers general safety concerns including moving parts, weather, and water exposure.

First Use Procedures

Guides on initial bicycle setup, vendor checks, and proper riding posture.

Pre-Ride Safety Checks

Instructions for performing essential checks before riding the bicycle.

Battery Pack Care and Safety

Provides instructions for safe handling, charging, and maintenance of the battery pack.

User Operations Without Assistance

Outlines tasks the user can perform independently and those requiring professional assistance.

Accessory and Component Modification Precautions

Advises against unauthorized modifications and component changes for safety.

Bicycle Design Suitability

Defines the intended rider profile and physical capabilities for using the EPAC bicycle.

Warranty Conditions Overview

Details the warranty terms, prerequisites, and exceptions for the bicycle.

Bicycle Description and Technical Data

External Dimensions

Provides key measurements and diagrams for the bicycle's dimensions.

Standard Equipment List

Lists all components and accessories included with the bicycle upon delivery.

Identifying Bicycle Components

Illustrates and lists all parts of the bicycle for easy identification.

Detailed Technical Specifications

Presents comprehensive technical data for different bicycle models.

Packaging Removal Instructions

Guides on how to safely remove the bicycle from its packaging.

Optional Accessories Information

Details available optional accessories for the bicycle.

Bicycle Component Descriptions

Describes key bicycle systems and components.

Checks and Inspections

First-Time Bicycle Usage

Guidance for the initial setup and safety checks before first use.

Routine Pre-Ride Checks

Daily inspection checklist for ensuring bicycle safety and proper function.

Wheel and Tyre Inspection

Procedures for checking wheels, tyres, valves, and pressure.

Saddle and Handlebar Checks

Ensures saddle, seatpost, and handlebars are secure and properly adjusted.

Brake System Inspection

Checks brake lever travel, caliper security, disk condition, and fluid leaks.

Chain, Motor, and Accessory Checks

Inspects chain, motor, lights, and other accessories for proper function.

Tightening Torque Specifications

Provides a table of recommended tightening torques for various bicycle components.

Assembly and Adjustments

Mounting the Pedals

Step-by-step guide for correctly installing the pedals onto the crank arms.

Adjusting the Handlebars

Instructions for aligning and adjusting handlebar height and position.

Saddle Adjustment Procedures

Guides on adjusting saddle height, position, and angle for different models.

Brake Lever Position Adjustment

Explains how to adjust the position of the brake levers for rider comfort.

Gear Change Lever Adjustment

Details on how to adjust the position of the gear change lever for optimal access.

Using Your Bicycle

General Riding Suggestions

Provides basic advice for safe and enjoyable bicycle operation.

Gear Change Unit Operation

Instructions on how to use the bicycle's gear system for efficient pedalling.

Braking System Usage

Guidance on operating the bicycle's brakes effectively and safely.

Basic Bicycle Operation

Steps for starting to ride, including pedal placement and brake release.

Post-Fall Procedures

Steps to follow after a fall or accident, including inspection and repair.

Bicycle Transportation

Instructions and warnings regarding transporting the bicycle, especially in vehicles.

Front Suspension Fork Controls

Explains how to lock/release and adjust the front suspension fork.

Rear Shock Absorber Controls

Details on locking/releasing and adjusting the rear shock absorber's rebound.

Recommended Sag Settings

Provides recommended sag percentages for front and rear suspension.

Battery Duration Factors

Lists factors affecting battery life and their impact on range.

Using Power Assisted Pedalling

Getting Started with Electric Assist

Initial steps for activating and using the power-assisted pedalling system.

Battery Pack Removal and Installation

Guides on safely removing and mounting the battery pack onto its support.

Battery Charging Procedures

Instructions for activating, charging, and checking the battery pack.

Mounting Battery Pack on Support

Step-by-step guide for securely installing the battery pack onto the bicycle frame.

Display Functions and Description

Explains the display unit's buttons, readouts, and information pages.

Pedalling Assistance Levels

Describes how to activate and select different levels of pedalling assistance.

Push Help Function

Explains the 'Push help' function for assisting the rider when walking the bike.

USB Connection Port

Information about the USB port for connecting external devices.

Battery Pack Care and Maintenance

Provides guidelines for cleaning, storage, and maximizing battery lifespan.

Cleaning and Maintenance

Cleaning and General Care

Instructions for cleaning the bicycle, emphasizing battery disconnection.

Periodic Maintenance Schedule

Outlines the recommended maintenance checks at different mileage intervals.

Detailed Bicycle Cleaning

Step-by-step guide for cleaning the bicycle, including chain lubrication.

Proper Bicycle Parking

Guidance on how to park the bicycle safely and securely.

Unscheduled Maintenance Operations

Guides for removing and mounting wheel units, including front and rear wheels.

Flat Tyre Repair

Instructions for repairing a flat tyre, including tube and tyre replacement.

Other Maintenance Operations

Covers operations not detailed elsewhere; consult vendor for specifics.

Winter Storage Guidelines

Advice on preparing and storing the bicycle for prolonged periods.

Troubleshooting and Error Codes

Troubleshooting Common Issues

Identifies common problems and provides solutions for the bicycle system.

Interpreting Error Codes

Explains system error codes and recommended actions to resolve them.

Fantic Motor INTEGRA 140 TRAIL User Manual

Table of Contents

Questions and Answers:

Fantic Motor INTEGRA 140 TRAIL Specifications

Summary