06
Ed. 1 - 03/2019Ed. 1 - 03/2019
ENGLISH
EN_31
Using power assisted pedalling
- To disable the assisted pedalling:
- Press button “T5” once or more times until the
graphic aside is selected; the system turns
o.
In the event of a prolonged use in severe
conditions, the motor will be powered in pro-
gressively reduced way in order to not exceed
the safety temperature.
Once the link has been performed, the new
connection is shown on the device.
The charging current is 5 ampere.
Fantic Motor takes no responsibili-
ty for eventual damages caused to
the external device connected to
the Usb port.
- To correctly disconnect the device, please refer
to the instructions supplied together with the
device itself.
7. TAKING CARE OF THE BATTERY PACK
Reducing the battery power
- In order to safeguard against overloads or overheating, the battery pack is equipped with an automatic
function that reduces the power according to the power level and temperature.
- When the battery cell temperature exceeds 70°C or falls to value between 0 and 10°C, the motor power is
reduced by 4 steps of 25% each until it is completely deactivated.
- When the charge level is <5%, the power-assisted pedalling function is switched o, in order to guarantee
sucient power to supply the display and illumination for another 4 hours until the battery deactivates
and enters auto-protection mode.
Maintenance, cleaning and storage
- Make sure that the battery pack is kept clean at all times.
Clean it thoroughly using a soft, dry cloth.
-
Do not immerse the battery pack in water (or other liquids) or clean it using water jets. If the battery pack
stops working, contact the authorized vendor.
- Never place the battery pack on a dirty surface. It is important to avoid encrustations on the recharging
socket and the contacts.
- For maximum battery life, treat the battery pack with care and, above all, respect the following storage
conditions.
- Temperature .............. 18 - 23°C
- Relative humidity ....0 - 80%
- Charge level ...............70%