Need help?Do you have a question about the Fantic XX 125 and is the answer not in the manual?
General| Transmission | 6-speed |
|---|---|
| Rear Suspension | Monoshock |
| Bore x Stroke | 54 x 54.5 mm |
| Front Suspension | Upside-down telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Disc brake |
| Engine Type | Liquid cooled, 2-stroke, single cylinder |
General introduction to the manual and the vehicle.
Safety warnings covering exhaust fumes, fuel, hot components, oils, brakes, and battery.
Explanation of warning, information, torque, measurement, equipment, and consumable symbols.
Safety tips for vehicle use, driving behavior, and specific riding conditions.
Location of the frame number punched on the steering tube.
Location of the engine number punched on the engine crankcase.
Identifies the location of hazard, quality, data plate, and other important labels on the vehicle.
Diagrams showing the location of handlebar and side components for different models.
Provides detailed specifications for XX 125, XE 125, and XX 250 versions.
Tables listing specified torque values for engine and chassis components.
Standard and limit values for engine, transmission, chassis, and electrical components.
Explains cable color coding and provides wiring diagrams for different models.
Information on front and rear lights, and turn indicators for the XE 125 model.
Identification and location of system protection and battery fuses for the XE 125 model.
Lists recommended products for engine oil, coolant, brake fluid, and other fluids.
Schedules for maintenance tasks for XX 125, XE 125 Racing, XE 125 Amateur, and XX 250 versions.
Checklist of items to inspect before operating the vehicle for safety and performance.
Recommendations for the initial break-in period to ensure proper component seating.
Instructions on how to refuel the vehicle, including safety precautions.
Procedures for starting a cold or warm engine using the kickstarter.
Instructions on how to safely stop the engine using the engine stop button.
Identifies and briefly explains key controls and components on the handlebar and vehicle.
Detailed explanation of the digital dashboard functions and indicator lights.
Procedures for adjusting front and rear brake lever position and pedal height.
Instructions for adjusting clutch lever position and clutch lever clearance.
Procedure for checking and adjusting the throttle grip clearance.
How to adjust the engine's idling speed using the throttle stop screw.
Steps for installing and adjusting the handlebar position for optimal rider ergonomics.
Instructions for removing, reassembling, and adjusting the rearview mirrors.
Explains carburetor function, setting parameters, and troubleshooting based on engine symptoms.
How to adjust rebound and compression damping on the front fork.
Procedures for adjusting rebound and compression damping on the rear shock absorber.
How to measure and adjust the rear shock absorber sag for optimal suspension performance.
Instructions for checking and adjusting the drive chain tension and alignment.
Procedures for checking and changing the transmission oil level and quantity.
Instructions for checking the coolant level and replacing the coolant.
Step-by-step guide on how to clean and maintain the air filter element.
How to remove, inspect, clean, and install the spark plug.
Procedures for removing, checking, and installing the engine's top-end components.
Detailed steps for removing, checking, and installing the clutch assembly.
How to check and adjust the steering head play for safe operation.
General guidance for front fork maintenance, advising to contact a workshop for hydraulic components.
Regular checks and tightening of shock absorber mounting screws and linkage fasteners.
Procedures for checking and tightening wheel spokes and inspecting wheel components.
Step-by-step instructions for replacing the front and rear brake pads.
How to check the front and rear brake fluid levels and recommended procedures.
Instructions for checking tire pressure and condition, and bead stopper function.
Procedures for checking chain tension, wear, and condition of the pinion and crown.
Guidelines for cleaning the motorcycle and preparing it for storage.
Preventive measures to take when storing the vehicle for extended periods.
Overview of performance, public road use, and warranty coverage for different models.
Details of Fantic's commercial warranty terms, coverage, and duration.
Terms and conditions for the off-road commercial warranty for specific models.
Specifies what Fantic warrants and what is covered by the commercial warranty.
Requirements for the customer to claim warranty, such as proof of purchase.
Lists items and conditions that are not covered by the warranty.
Information regarding jurisdiction for legal actions related to warranty claims.
Fields for recording vehicle and user data for warranty registration and tracking.
Guidelines for service registration and the user's responsibility to inform the dealer.
To Next Page
