Fantic Caballero 500 User Manual

IT
EN
DE
FR
1
THANK YOU
for choosing one of its products.
We recommend that you read this manual before driving your vehicle. It contains information, advice and warnings on the
vehicle maintenance and use. The instructions in this manual have been prepared to give you a simple and clear guide for
use. We are sure that taking it into consideration you will gain confidence with your new vehicle, which you can use for a
long time and with full satisfaction.
FANTIC WANTS TO THANK YOU

Fantic Caballero 500 Specifications

General

Displacement	449 cc
Transmission	6-speed
Seat Height	820 mm
ABS	Yes
Cooling System	Liquid-cooled
Fuel System	Electronic Fuel Injection
Engine Type	Single-cylinder, 4-stroke
Max Torque	43 Nm @ 6000 rpm
Fuel Tank Capacity	12 L
Weight	150 kg
Front Suspension	41 mm
Rear Suspension	adjustable preload
Front Brake	Single 320mm disc
Front Tire	110/80 R19
Frame	Steel trellis
Bore x Stroke	94.5 mm x 64 mm
Max Power	40 hp (29.4 kW) @ 7, 500 rpm
Rear Tire	140/80-17

Summary

General Warnings and Hazards

Motorcycle Care, Carbon Monoxide, Fuel, Hot Components

Used Oil, Brake Fluid, and Battery Safety

Fundamental Safety Rules

Safe Driving Practices and Vehicle Control

Covers safe driving, road codes, and vehicle operation rules.

Mounting, Starting, Stopping, and Gearbox Use

Running-in, Clothing, Security, Parking, Transport

General Content and Consultation

Dashboard Layout, Commands, and Settings

Ignition, Lights, Engine Controls, and ABS System

Explains ignition switch, lights, engine controls, ABS system, and their operation.

Refueling, Vehicle Storage, and Washing Procedures

Maintenance Procedures

Preliminary Checks and Engine Oil Management

Lists essential pre-ride checks and engine oil level inspection and topping up.

Tire, Brake System, and Suspension Checks

Covers tire pressure, tread depth, brake fluid/pads, and suspension checks.

Clutch, Chain, Battery, and Fuse Maintenance

Scheduled Maintenance Table Overview

Provides an overview of scheduled maintenance tasks and intervals.